SCTracker
Chain-of-custody & anti-fraud

The SC Tracker Handbook

Everything your team needs to run deliveries with proof — the operations console on the web, the driver app on the phone, and the same app for the storekeepers and guards inside your depots.

Console · app.sctracker.africa Field app · Android · drivers & site staff Chain of custody · tamper-evident Edition · November 2026
◆

How SC Tracker works

SC Tracker proves that goods left one place and arrived at another, in the right quantity, untampered — and keeps a permanent, tamper-evident record of every step. Every delivery is a three-party sign-off:

01 — Declare

The sender declares

Operations creates the handover: what's moving, how much, its value, and where it's going.

02 — Confirm

The receiver confirms

The driver confirms receipt on their phone — quantity, GPS location, a photo, and a digital signature.

03 — Witness

A witness co-signs

An independent party co-signs. A cryptographic receipt is sealed into the audit ledger — it can't be edited later.

🖥️
Operations · web

The console

Managers dispatch deliveries, register sites, invite drivers, watch the live board, and handle incidents at app.sctracker.africa.

📱
Drivers · Android

The field app

Drivers receive their work, confirm deliveries with GPS & photo, report incidents, and log stops — online or off.

🏭
Storekeepers & guards · Android

The same app, inside the depot

Site staff check trucks at the gate, count stock blind, put deliveries away, request write-offs and hand over shifts — each tied to their one site.

New in this edition

November 2026 · console and app updates arrive automatically
Load a list from ExcelProducts, suppliers and vehicles can be loaded from a spreadsheet in one go. SC Tracker checks every row first and adds nothing while any row is wrong. The stock, supplier, vehicle and handover lists can be saved as Excel files. Vehicle trackersA tracker fitted to a vehicle can report its position by itself, beside the driver's phone. The vehicle shows on the live map with its number plate, and its trail backs the trip audit when the phone reported nothing. Plans now decide the modulesEvery plan keeps the core chain of custody. Growth adds the modules for sites, suppliers and vehicles; Business adds assurance and payments. Locked modules show a lock in the menu and keep their history. Tightened after a full reviewSigning out ends the session on the server. A removed or re-paired phone is cut off at once. Nobody receives or witnesses their own delivery. A purchase order's total is the sum of its lines, and whoever changed it cannot approve it. Marking stock down does not move an adjustment under the approval limit. Relaxing a control limit alerts the other managers. Gate passes are issued from the console only. The phone app keeps your workRecords waiting to send are never deleted when a session ends, a repeat send never creates a second record, a phone in daily use renews its own pairing, and the lists you opened with signal stay readable without it. SealsRecord the seal number at dispatch; the receiver must read it back, and a different number disputes the delivery on its own. Confirm by SMS or USSDA receiver with an ordinary phone confirms with a one-time code — no smartphone, no app. Site OperationsGate passes and gate checks, blind cycle counts, put-aways, write-off approvals and shift custody inside each warehouse. Procurement controlsApprovals that stick to the figures and come from a different Admin, vetted suppliers, supplier deliveries received at the gate and put away on the phone, cancel-not-delete, and invoices matched three ways. Adaptive DefenceSC Tracker learns from what you confirm and dismiss, learns each depot's and driver's own normal, finds the classic ways round a control — structuring, pairing, weekend dispatches that arrive short — and proposes the tightening that would have caught it; an auto lane applies tightenings inside your bounds, never a loosening, every change reversible. It also explains each finding in plain language, tests itself weekly against your own settings, issues a signed monthly posture report, and shares anonymised tactic signals across the network. Cold chain controlsFridges, freezers, cold rooms and reefers are registered with a safe range. Readings come from rounds on the phone with a photo, or from registered loggers. Excursions, missed rounds and silent loggers are raised on their own, and cold deliveries carry the temperature at both ends. Gate pass with every warehouse dispatchA delivery leaving a site with gate staff gets its exit pass automatically, from the dispatch record. The driver shows it on the phone; the guard’s check lands on the delivery. Shift checklists you setWhat the open-shift and close-shift screens ask is now yours to add to, rename or trim — for the whole organisation or per site — and the app shows your wording. Every removal is on the record, with who and when, and alerts the people in charge. Check-insA long stop, a detour, a count that does not match or a short put-away now makes the person's own phone ask them, at that moment, with one-tap answers — the answer justifies or lands on the incident, silence escalates, and implausible answers are scored. Fleet controls & route watchEvery fill tied to the truck, its odometer, the distance the phone travelled and a receipt; garage bills approved like purchases; vehicles archived not deleted; every excursion off a route an incident the driver must explain and operations acknowledge. Inventory controlsNo stock figure is typed over any more: every change is an adjustment with a reason, held for a second Admin above a value you set; opening balances are Admin-only; transfers move stock for real under a gate pass and are put away at the receiving site; nothing with stock or history can be deleted. Emergency alertsA held button on a driver's or guard's phone raises a critical alert with a siren and spoken warning on every console — and, once you switch on phone alerts in Settings, on your phone's lock screen even with the browser closed. Anonymous tip-offsStaff and the public report theft or fraud by poster QR, SMS or USSD, without a name — read only by named handlers. Donor report & EUDRAn issued, publicly checkable assurance report per funder, and origin plots plus a due diligence statement for EU-bound commodities. Pay-on-proofA sealed receipt releases the transporter's payment to Airtel Money or TNM Mpamba, with approvals and caps. Data protectionExports, subject access, erasure and a breach register with the 72-hour MACRA clock — the Malawi Data Protection Act, 2024, in one panel. Receipts sealed in BitcoinLedger anchors are now timestamped by an independent authority and sealed in a Bitcoin block; the verify page shows both. Site-staff appThe field app now has a home screen for storekeepers and guards, paired to one site.
1For operators · web console

Sign in for the first time

Your account was created for you. The first time, set your own password with the “Forgot password” link — no password is ever shared by email or message.

A

Set your password

  • Open app.sctracker.africa and choose Forgot password.
  • Enter your work email — a set-password link arrives in your inbox.
  • Choose a password, then sign in.
Tip — the console works in any browser, including your phone's. Bookmark it on the depot computer.
app.sctracker.africa
Sign in
Email
ops@yourcompany.mw
Password
••••••••
Sign in
Forgot password →
The Command Center after sign-in: headline numbers, a chart of handovers by state, the live anomaly feed and the recent handovers table
After you sign in you land on the Command Center: today's numbers, the live anomaly feed and the latest handovers.
2For operators · web console

Add your sites & warehouses

Every depot, warehouse, and project site is registered once — with its GPS coordinates. Those coordinates are what let SC Tracker geofence arrivals, audit routes, and spot unusual stops automatically. A project site must have GPS.

A

Warehouse → Add warehouse

  • Give it a name and pick a Type — Depot, Hub, Cold store, Retail, or Site (project/construction).
  • Tap Capture GPS on this device while you're standing at the site, or type the latitude & longitude.
  • Save. A site won't save without coordinates.
Warehouse
Add warehouse
Warehouse name
Kanengo project site
Location
Lilongwe
Type
Site (project) ▾
GPS coordinates * 📍 Capture GPS
-13.9542
33.7620
Required — a site's GPS geofences arrivals and witnessing there.
Add warehouse
1Choose Site for a delivery destination like a construction or project site.
2Capture GPS on-site for accuracy — this powers geofencing & the route audit.
The Add warehouse dialog open over the Warehouse page, filled in for a project site with its name, place, type and GPS coordinates
Warehouse → Add warehouse, filled in for a project site. A site needs its GPS coordinates before it will save.
3For operators · web console

Invite your team, drivers & site staff

Staff sign in with a work email; drivers, receivers, witnesses and site staff pair their phone with a one-time code. Everyone gets a role that decides what they see and can do.

A

Staff → invite a field party

  • Go to Staff & Drivers and add the person's name.
  • For a driver, the console shows a pairing code and QR — share it with that driver.
  • A new or replaced phone: an Admin or Logistics Manager issues a new pairing code for the same person. Pairing the new phone retires the old one at once, and the new phone registers its own signing key. Anything the old phone had not yet sent stays on it and goes out if that person pairs it again.
  • Only an Admin or Logistics Manager can change a field party's phone or mobile money details. The change is on the ledger, the other managers are alerted, and payouts to a number changed in the last 24 hours wait for approval by someone else.
  • You can invite receivers and witnesses the same way.
  • For a storekeeper or guard, choose the role Warehouse (storekeeper / guard) and pick their site. Each site party is paired to exactly one warehouse, and nothing they do in the app can touch another site (section 31).
B

Give each person a role

  • Admin — full access, including Settings and the team.
  • Logistics Manager — the whole operation, minus owner-only billing.
  • Procurement Officer — purchase orders, suppliers, orders & financials.
  • Warehouse Staff — inventory, warehouses, distribution, handovers, and Site Operations (read, and issue gate passes).
  • Driver — their own work, GPS & custody, in the app.
  • Warehouse (storekeeper / guard) — a field role, in the app: gate checks, counts, put-aways, write-off requests and shifts at their one site. The roster on Staff & Drivers shows which site each one is paired to. An Admin can give a warehouse manager all sites — the app then shows a Switch site button and what they record goes to the site shown.
  • Auditor — read-only view of the evidence (custody, incidents, claims, forensics) for an insurer or external reviewer. An Auditor can also be named a tip handler (section 21).
One code per person. Pairing codes are single-use and expire — generate a fresh one if a driver waits too long. Roles are enforced on the server, so a read-only auditor can never change anything.
Staff & Drivers
Invite driver
Full name
Yankho Phiri
Role
Driver ▾
Pairing code
7K4-QP9
Driver enters this once in the app
Staff and Drivers page: the invite form, and below it the new driver's one-time pairing code with its QR code to scan
Staff & Drivers → invite a field party. Type the name, choose Driver and tap Generate code; the one-time code and its QR appear for the driver to scan.
4For operators · web console

Send out a delivery

A delivery to a customer or driver. From Chain of Custody → Initiate handover, keep the default External delivery mode.

A

Fill in the delivery

  • Shipment, product, quantity, and estimated value.
  • From a registered site, to the receiving driver (a paired field party).
  • Add the customer's email (for a tracking link) and their WhatsApp / phone number.
  • Attach a photo of the loaded goods — recommended.
B

The optional fields that add proof

  • Seal number — the tamper-evident seal you apply at dispatch. The receiver must read it back when the goods arrive; a different number disputes the delivery automatically and files a claim.
  • Receiver phone — for a receiver with an ordinary phone. They get a one-time code by SMS and confirm by text or USSD (section 10).
  • Funder / programme — groups the delivery on the donor assurance report (section 22).
  • Transporter payment on proof — the Kwacha amount paid to the driver's mobile-money wallet once the receipt is sealed, while Pay-on-proof is on (section 23).
Chain of Custody
🚚 External deliveryTo a customer / driver
🏢 Internal transferTo our own site
Product
Maize flour (50kg)
Qty
120 bags
Receiver (driver)
Yankho Phiri ▾
From site
Kanengo ▾
Customer WhatsApp / phone
0991 234 567
Initiate handover
1The receiver must be a paired driver — they confirm on their own phone.
2The phone number powers the Share on WhatsApp button (section 9).
Chain of Custody page with the Initiate handover form open in External delivery mode, filled in with the shipment, product, quantity, value, sending site, receiving driver and customer email
Chain of Custody → Initiate handover in External delivery mode: what is moving, how much, its value, the sending site, the receiving driver and the customer's email.
The lower half of the Initiate handover form filled in: declared quantity and value, the receiving driver, the witness list, the customer's email and WhatsApp number, the receiver's phone for feature-phone confirmation, the seal number, the transporter payment on proof and the funder or programme
The same form, lower down: the receiver's phone for SMS or USSD confirmation, the seal number, the transporter payment on proof, and the funder or programme the delivery belongs to.
A confirmed handover card: sender declared, receiver confirmed the quantity, two witnesses signed, variance within tolerance, and the tamper-evident receipt with its QR code
The same handover once it is complete: the sender declared, the receiver confirmed the quantity, both witnesses signed, and the sealed receipt with its QR code.
Gate pass on the card. A delivery that leaves a warehouse with gate staff shows its gate pass on the card: issued, then “exit allowed” with the guard’s name, or “exit refused” in red with what did not match. The same line is written on the custody record.
Seals on the card. A sealed handover shows its seal number on the card; once the receiver has read it back it reads “verified intact at receipt”. A mismatch turns the card red, disputes the handover, raises a claim and alerts operations — nobody has to notice it by eye.
5For operators · web console

Move goods between your own places

Moving stock from a warehouse to your own project or construction site — including materials the company bought for that site — uses Internal transfer mode. Same signed, witnessed custody trail, but received by your own staff, with no external customer.

A

Switch to Internal transfer

  • Pick the destination site (it must have GPS — see section 2).
  • Choose the receiving staff (e.g. the site manager) and a witness (e.g. the site supervisor) — both confirm on their devices.
  • No customer details needed. The signed receipt is your internal proof of the movement.
Chain of Custody
🚚 External deliveryTo a customer / driver
🏢 Internal transferTo our own site
To site (destination)
Area 49 project site · 📍 on file
Receiving staff
Site Manager ▾
Witness
Site Supervisor ▾
Initiate transfer
6For operators · web console

Inventory & stock levels updated

Track what's in each warehouse — quantities, value, and expiry dates — and know that no stock figure can be quietly typed over. SC Tracker raises an alert before something runs low or expires, and every change to a quantity carries a reason, a name and, above a value you set, a second Admin's approval.

A

Inventory → stock by warehouse

  • See every product's quantity and value per warehouse at a glance.
  • Set a reorder level per item — stock below it is flagged low.
  • Add an expiry date for perishables — the expiry watch warns you as the date nears, and pings the notification bell (“view stock”).
  • A new product starts at 0 and is stocked by a goods receipt, a put-away or a transfer. Only an Admin may enter an opening balance — it is recorded as a labelled adjustment in their name.
A+

Excel — load your list, or save it

  • Import from Excel loads a whole product list in one go. Press Download the template, type one product per row under the headings, then choose the file. An .xlsx or a .csv file works, up to 500 rows at a time.
  • SC Tracker checks every row first and shows what is ready, what is already on file and what needs fixing, with the row number. Nothing is added while any row is wrong, and nothing is added until you press the green button.
  • A product that is already on file is skipped: an import never changes a quantity or a price that is there. An opening quantity in the sheet needs an Admin, exactly as on the form.
  • The same button loads suppliers (Procurement) and vehicles (Fleet & Vehicles). Imported suppliers arrive awaiting vetting, like any new supplier.
  • Export to Excel on Inventory, Suppliers, Fleet and Chain of Custody saves the list on screen as an Excel file. Your file is read on your own computer: only the rows are sent to SC Tracker.
B

Adjust — the only way a desk changes a quantity

  • Adjust on a product asks for the new quantity and a reason (count correction, damage, expiry, found, data error, other with a note). The change and its value are shown before you confirm.
  • Below your adjustment approval threshold (MWK 500,000 unless Settings says otherwise) it applies at once. At or above it, the quantity does not move until an Admin who did not request it approves — the request sits under Stock adjustments with Approve / Reject, and can be withdrawn with a reason.
  • Stock at a depot that has storekeepers on the app is never adjusted from a desk: losses are a write-off, found stock a put-away, a disputed figure a blind count — all from the site (section 11).
  • Every adjustment is written to the tamper-evident ledger. Large ones, repeated ones on the same product, write-downs and any self-approval are scored by Fraud Sentinel (section 16).
  • A product with stock or history and a warehouse with stock or site staff cannot be deleted — the record stays.
C

Distribution → transfers that move stock

  • New transfer: pick the source and destination warehouse and the lines from the source's stock — you cannot send what the source does not have.
  • Dispatch when the vehicle is loaded: the lines leave the source and an outbound gate pass is issued for the guard; the quantity and value in transit show on the page.
  • At a destination with storekeepers the transfer appears under Transfers arriving on their phone, and their put-away completes it. A store without site staff receives it at the desk — never the person who dispatched it.
  • A short or different arrival is flagged and operations are told. A transfer on the road is cancelled only by an Admin, with a reason, and the stock returns to the source. A status is never set by hand.
Inventory
Kanengo depot · stock
Maize flour (50kg)2,400 bags
Cooking oil (20L)Low · 18 left
Measles vaccineExpires in 9 days
Adjust · Maize flourAwaiting approval
2,400 → 2,350 bags · −50 · MWK 2,250,000 · count correction · by Chuma
Quantity moves when another Admin approves
🔄 TRF-2026-4F2A · HQ → KanengoIn transit
100 bags Maize · gate pass issued · MWK 4,500,000 on the road
⏰Expiry watch — 2 items need attention this week
7For operators · web console

Procurement & purchase orders updated

Raise purchase orders to suppliers, have them approved, receive the goods where they actually arrive, and match the supplier's invoice — with values in Kwacha. The same discipline that guards a delivery now guards a purchase: who approved what, who received it, and what was billed are three different people and three records that must agree.

A

Procurement → raise a PO

  • Pick a supplier, add line items with quantity and unit price — the total is worked out for you. A supplier typed in for the first time is added to your vendor list as unvetted.
  • At or above your approval threshold (MWK 5,000,000 unless Settings says otherwise) the PO goes to awaiting approval. Below it, mark it sent or email the PDF to the supplier.
  • An overdue PO pings the bell (“view purchase order”). A PO that has left draft is cancelled with a reason, never deleted — the record stays.
B

Approval — a different Admin, and it sticks to the figures

  • An Admin who did not raise the PO approves it. The approval records the total, the supplier and the lines it covered.
  • Change any of those afterwards and the approval is voided — the PO goes back to the queue and nothing can be sent or received against it until it is approved again.
  • A PO at or above the threshold cannot be approved, sent or received for an unvetted supplier. An Admin vets new vendors on the Suppliers tab (approve, or block for good).
C

Receiving — where the goods are, by someone else

  • At a warehouse with site staff on the app (section 11), click Expect delivery: an inbound gate pass is issued from the PO lines. The guard scans it when the supplier's truck arrives and checks every line; the storekeeper puts the PO away on the phone, which writes the goods receipt. The desk cannot receive there.
  • At a store without site staff, a colleague — never the person who raised the PO — records what arrived at the desk, with batch and expiry.
  • A shortfall against the PO, or a delivery refused at the gate, is flagged to operations before any stock moves.
D

Invoices — the three-way match

  • Record the supplier's invoice against the received PO. SC Tracker compares it with the goods receipt: within 2% is matched; otherwise a variance; the same number or amount again from that supplier is a duplicate.
  • An Admin who did not record it approves or rejects it. A flagged invoice can only be approved with a written reason.
Starting with a supplier list? Load it from Excel before the first order: Import suppliers from Excel on the Procurement page (section 6). Each one still needs an Admin's vetting.
Fraud Sentinel watches the real flow. Every approval feeds it (the same officer approving the same supplier again and again; a sole Admin approving their own PO), as do several small POs to one supplier that together slip under the approval threshold, POs sent to unvetted vendors, and repeated invoices. A unit price well above your own history raises a price alert on the page itself, and the AI Investigator (section 18) can tell you which suppliers are overcharging.
Procurement
PO-1182 · Steel Traders LtdAwaiting approval
Cement 32.5N × 400 · Rebar Y12 × 120 · raised by Petra Phiri
TotalMWK 8,640,000
PO-1176 · Lilongwe FuelsReceived on site
✓ approved by Agnes Banda at MWK 2,150,000 · gate check passed · put away by Alfred
Invoice INV-2231matched
PO-1190 · Mzuzu HardwareUnvetted supplier
MWK 6,200,000 — an Admin must approve the vendor before this PO can be approved
8For operators · web console

Fleet & vehicles updated

Keep every vehicle's details, documents and service schedule in one place, and put the two places fleet money leaks — fuel and garage bills — under the same checks as a delivery. SC Tracker warns you before insurance or a certificate of fitness expires, or a service falls due; it ties every fill to a truck, an odometer and a receipt; and it holds a repair bill until an Admin who did not record it approves it.

A

Fleet & Vehicles → register a vehicle

  • Add the registration, make and type, and assign the driver — every reassignment is kept as history, and the assigned driver is whose fuel and trips the truck is reconciled against.
  • Record insurance, COF / road-worthiness and service dates — each one is tracked; alerts ping the bell (“open fleet”).
  • A vehicle with fuel, repairs, trips or documents on file is archived, never deleted — the record stays.
B

Fuel — every fill checked against the truck

  • The driver logs litres, the odometer and a photo of the receipt in the app; the app shows them their truck's last reading and what it usually needs.
  • SC Tracker works out this fill's consumption from the kilometres since the previous fill, compares the litres with the vehicle's own history, checks the odometer only went forward, and compares the odometer advance with how far the phone actually travelled.
  • An odometer that goes backwards, kilometres the phone never travelled, more litres than the truck needs, or a missing receipt are flagged on the Fleet page and scored in Fraud Sentinel (section 16). The receipt is one click away.
C

Maintenance — a garage bill is a purchase

  • The garage is a supplier on your vendor list (section 7); a new name starts unvetted and a blocked one is refused.
  • A bill at or above your maintenance approval threshold (MWK 1,000,000 unless Settings says otherwise) waits for an Admin who did not record it, and does not count in cost per km until approved. The garage must be vetted first.
  • A third repair of the same kind on one truck in 90 days, or a cost well above your usual, is flagged and needs a written reason to approve. Entries are cancelled with a reason, never deleted.
D

Vehicle trackers — the vehicle reports by itself

  • Under Vehicle trackers, type the tracker's serial number or IMEI, choose the vehicle and press Register and issue key. The key is shown once: copy it into the tracker, or into the tracking platform it reports through.
  • The tracker sends its position to the address shown on the page, with its key. The vehicle comes from the key: nothing in a message can change it. Revoke stops a key at once, and removing a vehicle from the register closes its tracker.
  • A platform that forwards many trackers through one address uses a feed: register each tracker, then open a feed. A feed can only report for trackers you registered here.
  • The vehicle appears on the live map with its number plate. A trip on which the driver's phone reported nothing is audited against the vehicle's own trail (section 12). Live detour alerts still come from the driver's phone.
  • A tracker must be able to send a web request, or report through a platform that can. Many need a small adapter, so ask us before you buy. Vehicle trackers need GPS tracking on your plan.
Loading the fleet? Import from Excel on the vehicle registry loads a list of vehicles in one go, and Export to Excel saves it (section 6). Drivers are assigned afterwards on this page.
Route watch. A truck that leaves its expected route, and a phone sending fake GPS, now open an incident and a record operations must acknowledge — and the driver's phone asks them why on the spot (Driver check-ins, under Route watch). See section 12.
Fleet & Vehicles
🚛 MW-BT 4471On trip
InsuranceExpires in 21 days
ServiceDue now · 15,000 km
⛽ Fuel · MW-BT 4471Over-fill
90 L after 400 km · expected ~56 L · receipt ✓
OdometerWent backwards
🔧 Gearbox · City MotorsAwaiting approval
MWK 1,500,000 · recorded by Lena · garage unvetted
9For operators · web console

Share the tracking link on WhatsApp

On any active external delivery, one tap opens WhatsApp with the customer's number and a ready-to-send tracking message. You send it from your own WhatsApp — no extra setup, no cost.

A

Tap “Share on WhatsApp”

  • On the handover card, tap 🟢 Share on WhatsApp.
  • WhatsApp opens with the customer's number and the message pre-filled — just press send.
  • No phone number on file? WhatsApp opens and lets you pick the contact.
Chain of Custody
Maize flour (50kg) · 120 bagsAwaiting receiver
SHP-4471 · to Kanengo customer
🔗 Copy tracking link🟢 Share on WhatsApp
WhatsApp message
Track your Maize flour (50kg) delivery (SHP-4471) live: app.sctracker.africa/track/…
10For operators · web consolenew

Confirm by SMS or USSD — for receivers without a smartphone

A receiver with an ordinary phone confirms a delivery by text or by dialling a USSD menu. Add their number when you initiate; SC Tracker texts them a one-time code, and when the goods arrive they reply with it. The result is the same signed receipt, witnesses, claims and alerts as a smartphone sign-off — the receipt simply records confirmed via SMS from +265 99•• ••• 567, one-time code verified instead of a device signature.

A

Initiate with a receiver phone

  • Type the number in Receiver phone on the initiate form, or keep it on the receiver's Staff record once.
  • The handover card shows the code's status; Resend code sends a fresh one — to a corrected number if needed.
  • The code works only from the number it was sent to, locks after five wrong tries, and can be used once.
B

What the receiver sends

ReplyEffect
OK 482913 40Confirms 40 units received. Add the seal number after the quantity when the consignment was sealed.
NO 482913 two bags tornDisputes the delivery and files a claim with that reason.
STATUS 482913Where the delivery stands.
HELPThe instructions again. Chichewa INDE / AYI work in place of OK / NO.
USSD, for phones that cannot text easily. Dial the service code and choose 1 Confirm delivery, 2 Report a problem or 3 Delivery status, then follow the prompts: code, quantity, seal (only if sealed), yes/no. The same menu carries 4 Report wrongdoing for anonymous tip-offs (section 21).
Set up with you. SMS and USSD run through your organisation's gateway number and service code, which we connect for you. Until they are live the card shows the code as queued rather than pretending it was sent.
9:41▮▮ 2G
‹Messages
SC Tracker: 40 bags Maize 50kg (SHP-2026-118) is on its way to you. When it arrives reply: OK 482913 <quantity received> <seal number>. Problem? Reply: NO 482913 <reason>. Or dial *384*4321#.
OK 482913 40 SL20481
Received: 40 bags Maize 50kg (SHP-2026-118) confirmed, seal SL20481 matches. Thank you.
one-time code · used once · number verified
11For operators · web consolenew

Site Operations — what happens inside each warehouse

Most losses happen inside the depot, not on the road. Site Operations is the office view of six things your storekeepers and guards do on their phones: gate passes and gate checks, the gate log, blind cycle counts, put-aways, write-offs and shift custody. Anything that does not add up becomes an incident on its own.

A

Set a site up

  • Register the warehouse with its GPS (section 2).
  • Invite each storekeeper and guard from Staff with the role Warehouse and pick the site (section 3).
  • Add the site's stock lines in Inventory so counts, put-aways and write-offs have something to act on.
B

Gate passes & gate checks

  • Issue a pass for every load leaving (or arriving): reference, vehicle, driver, seal, and every line with its quantity. Print the QR or let the guard look it up.
  • Deliveries get their pass on their own. When a handover is initiated from one of your warehouses and that site has gate staff on the app, the exit gate pass is issued with it, written from the dispatch itself: product, quantity, vehicle and seal. The driver’s app shows it (Show gate pass), and the delivery card in the console carries it with a Show QR button. A driver cannot create one: only the office’s dispatch does. Purchase orders (Expect delivery) and transfers (Dispatch) issue theirs the same way.
  • At the gate the guard scans the pass and reads back the vehicle, the seal and every line, then allows or refuses the exit. A pass works once.
  • Any gap — expired pass, wrong vehicle, wrong or unread seal, a short or extra line — raises a Gate discrepancy incident: high if the goods still left, medium if the guard refused.
Site Operations · Gate passes
GP-…1U · out · SHP-2026-211Passed
MW-BT 4471 · seal SL-20481 · 120 bags Maize flour, 30 drums Cooking oil
●Maize flour (50kg): 118 seen, pass says 120 → incident
GP-…78 · out · SHP-2026-214Issued
MW-CC 1180 · 400 bags Fertiliser NPK · valid 12 h
Site Operations, Gate passes tab: the form to issue a pass on the left, and on the right three passes for Kanengo depot — two issued, one passed by the guard with a red note that 118 bags of maize flour were seen against 120 on the pass and a link to the incident
Gate passes for one depot. The guard let the maize load through with two bags short; the check is recorded in red with a link to the incident it raised.
C

Blind cycle counts

  • Schedule counts by product or at random, for a named counter or whoever the system picks. Two-person counts send the same line to two people independently.
  • The counter sees the product, never the book figure, and is told only “recorded”.
  • A variance of 2 % or more (your operator can tune this), or two counters disagreeing, opens a Stock variance incident attributed to the count — critical above MWK 1,000,000 of value by default.
D

Put-aways, write-offs & shifts

  • Put-aways — the storekeeper receives a confirmed delivery, a supplier delivery on a purchase order or a transfer from another warehouse into stock; a put-away that differs from what was confirmed, ordered or sent is flagged. One put-away per delivery, and the only way stock arrives at a staffed site.
  • Write-offs — damage, expiry, spoilage or theft is requested from the phone with a photo; stock moves only when an Admin or Logistics Manager approves, and the requester can never approve their own.
  • Shifts — opened and closed with a checklist and photos; keys are handed to a named colleague who accepts them. A “not OK” on any check, or a shift still open after 14 hours, alerts operations. The checks are yours to set (Shifts → Opening and closing checklists → Edit, Admin or Logistics Manager): add, rename or remove items for the whole organisation or for one site, up to 20 per list; the app shows whatever you set. Nothing is removed quietly: the editor warns before a removal is saved, and every change is written to the ledger under your name, naming each item removed, added or reworded. Change history under the lists shows it. A removal also alerts Admins and Logistics Managers at once (bell, email, and phones with alerts switched on), naming the check and who removed it.
  • Gate log — every vehicle and visitor in and out, with flags for no pass and refused exit.
Site Operations · Blind counts
Maize flour (50kg)Variance
Book 2,400 · counted 2,184−216 · −9 %
Counted by Tamanda Kachale · twice, bay 3 and bay 4 → incident
Cooking oil (20L)Verified
Book 310 · counted 3100 %
Site Operations, Blind counts tab: the scheduling panel with the depot's stock lines on the left; on the right three counts — cement assigned, cooking oil verified at zero variance, and maize flour counted at 2,184 against a book figure of 2,400, a −9 % variance with a link to the incident
Blind counts: the storekeeper counted 2,184 bags of maize flour against 2,400 on the books. The −9 % variance opened a critical Stock variance incident; the counter was told only that the count was recorded.
Site Operations, Write-offs tab: one request awaiting approval — 40 bags of cement damaged by a roof leak, MWK 864,000, with two photos and Approve and Reject buttons — and below it the history with an approved expiry write-off of 12 drums of cooking oil
Write-offs: a damage request with its photos waits for an Admin or Logistics Manager; the history below shows an approved expiry write-off with who decided and when.
12For operators · web console

GPS tracking, wallboard & route audit

See where your vehicles have reported from, watch operations on one board, and let SC Tracker flag trouble for you — trucks that leave the expected route, and trucks that stop too long where they shouldn't.

A

Live GPS tracking

  • Open GPS Tracking to see each vehicle's most recent reported position on a map — as long as the driver's app is open with location switched on.
  • On Android, a fix that comes from a fake-GPS app is flagged red — a sign of spoofing.
  • Arrivals and departures at a site are logged from the GPS the app sends (geofenced) — a hands-free record of when a driver reached the site.
  • A vehicle with its own tracker registered (section 8) shows on the same map as a number plate, whether or not the driver's app is open. Click the plate to trace its last 24 hours.
GPS Tracking
🚚 MW-BT 4471Moving
🚚 MW-CC 1180At site
🚚 MW-LL 9302GPS spoof
GPS Tracking page with a trip audit open: the map of Malawi showing the expected route as blue dashes, the truck's actual trail in green, an off-route stretch in red, and the detour flagged with distance and deviation figures
GPS Tracking with a trip audit open: the expected route (blue dashes), where the truck actually went (green), the off-route stretch (red) and the detour flagged.
B

The live Wallboard

  • Open Ops Wallboard for live trucks, active deliveries, and alerts.
  • Tap ⛶ Fullscreen to fill a TV or projector at the depot.
  • Route deviations and unusual stops show up as alerts shortly after they're detected. Every excursion off the route is now also an incident and a record on the Fleet page's Route watch that operations acknowledge. The driver's phone asks them at that moment — “we noticed you are off the expected route, is everything okay?” — with one-tap answers (section 30); road closed, roadblock, diversion, checkpoint or breakdown marks it justified, and the answer lands on the incident. The record closes when the truck is back on the route and opens again if it leaves a second time.
  • Driver check-ins on the Fleet page show who was asked what, what they answered and how long they took. No answer within 10 minutes is escalated to you and opens an incident; “fuel” with no fill logged, the same excuse every trip, a rest at 2 a.m. or an answer only after escalation are scored in Fraud Sentinel. A stop drivers keep explaining as a checkpoint or a fuel station becomes a known stop nobody is asked about again.
  • Fake GPS on a live delivery opens a high incident and a spoofing record the same way.
  • Tracker dark — a truck on an active delivery that stops reporting for 20 minutes (by default) raises an alert, because a tracker switched off mid-route is itself a warning sign.
  • Risk map — corridor hotspots built from anonymised incidents across SC Tracker, never naming an organisation, show on the GPS layer and the wallboard, so a route through a known trouble spot is briefed rather than discovered.
C

Trip audit & justified stops

  • In GPS → Trip audit, compare a trip's expected route (blue) against where the truck actually went (green). How far off counts as a deviation is a setting per organisation and widens on long hauls.
  • When road routing is unavailable, SC Tracker still watches the straight line to the destination with a wider allowance — a truck bound for another district is caught either way.
  • An unexplained long stop away from any site is flagged — and the driver's phone asks them about those minutes. A logged reason (lunch, roadblock, breakdown) or a check-in answer records it quietly instead.
Ops Wallboard
3
Trucks live
2
Active deliveries
1
Unusual stops
🚨 Live alerts
↪Route deviation — HND-2231 · Fertiliser
⏸Unusual stop (44 min) — HND-2240 · no reason logged
The Operations Wallboard: trucks live, active deliveries, open incidents and value in transit, the fleet on a map of Malawi, live alerts and open incidents
The Ops Wallboard: trucks live, active deliveries, the fleet on the map, live alerts and open incidents. Made for a depot TV.
13For operators · web console

Cold chain

For goods that spoil when they warm up or freeze: vaccines, medicines, fresh and frozen food. Every fridge, freezer, cold room and reefer is registered with the safe range it must hold. Readings come from your storekeepers' rounds on the phone, each with a photo of the thermometer, or from loggers you register. Nothing is typed in at a desk, and whoever sends a reading cannot choose what counts as safe.

A

Set it up

  • Safe ranges: you start with three profiles — Vaccines and medicines (2 to 8 °C), Chilled food (0 to 5 °C) and Frozen goods (−18 °C or colder). Each also sets how long a unit may sit outside the range before it is serious. Only an Admin changes them; widening a range is recorded as a loosening and alerts operations.
  • Units → Register a unit (Admin or Logistics Manager): the name, what it is, the warehouse it stands in (or the vehicle, for a reefer), its profile and how many rounds a day. From then on it is watched.
  • The storekeeper or guard paired to that warehouse finds the unit under Cold rounds in the app (section 33).
  • Load sample data (top right) fills the page with five example units, their readings, rounds, loggers and two excursions, so you can see how it works before registering your own. Everything it adds is marked Sample, raises no alert, reaches no phone, and goes again with Clear sample data.
B

Rounds and readings

  • Two rounds a day by default, morning (06:00 to 10:00) and afternoon (14:00 to 18:00). The storekeeper reads the display, types the figure and photographs the display. A reading without a photo is refused, and it can only be logged for a unit at their own site.
  • A round nobody did while the site was open on shift is a missed round: operations are alerted. With no shift open it is shown as unattended instead, so a weekend does not flood you.
  • A reading logged long after it was taken is marked late. Ten identical readings in a row by one person go to Fraud Sentinel: that is how a chart is filled in without looking at the fridge.
  • Chart and readings on a unit draws its temperature against the safe range over 24 hours, 7 days or 30 days. The line turns red where it leaves the range, excursions are shaded, missed rounds are marked, and hours with no reading are left as gaps. Readings taken by hand are dots: click one to see the photo of the thermometer. Each excursion has a Chart of its own, with an hour either side.
C

Excursions

  • One record per spell outside the range, however many readings it took: when it began, the worst temperature, how long, who was in charge (the shift holder, or the driver of the vehicle) and what they did about it.
  • No news is bad news. If no in-range reading closes it within the profile's grace period, the excursion becomes serious on its own: an incident, an alert, a Fraud Sentinel flag. Freezing a freeze-sensitive product is serious at once.
  • An Admin or Logistics Manager then decides what happens to the goods — release, quarantine or discard — with the reason on the ledger. Goods cannot be released while the unit is still out of range, and the site that was judged cannot decide.
  • A spoilage write-off (section 11) shows the approver what the cold-chain record at that site says: the excursion behind it, or none at all.
D

Loggers, when you have them

  • Loggers → Register: enter the logger's serial number and the unit it sits in. It gets its own key, shown once. The logger, or the gateway it reports through, sends readings with that key.
  • The unit and the safe range come from the key. Nothing in the logger's message can change them, and a key cannot write to another unit.
  • A logger that goes quiet is alerted: switched off, unplugged or moved, it records nothing. Revoke stops a key at once.
E

Cold deliveries

  • On Initiate handover (section 4) choose the Cold chain profile and enter the temperature read at loading. The safe range travels with the delivery.
  • The receiver must enter the temperature at receipt, as they read a seal back. Out of range, the delivery is marked, an incident is raised and operations are alerted. A delivery confirmed by SMS is marked “not read at receipt”.
Cold Chain · Units
❄️ Vaccine fridge 1In range
5.2 °Csafe 2 to 8 °C
Read by hand 20 min ago · 2 rounds a day
❄️ Vaccine fridge 2Out of range
11.4 °Csafe 2 to 8 °C
🌡Outside its range for 46 min, worst 11.4 °C · serious
❄️ Freezer roomReading due
A reading is due before 18:00
Cold Chain page, Units tab: tiles for units monitored, units out of range, goods awaiting a decision, rounds on time and loggers; below, one card per fridge, freezer and reefer with its latest temperature against its safe range. One vaccine fridge is out of range and marked serious
Cold Chain: every unit with its latest reading against its safe range, who read it and when. One vaccine fridge has warmed past 8 °C and its excursion is serious.
14For operators · web console

Incidents, cases & emergencies

When a driver reports a problem — a breakdown, theft, accident, delay — it lands in Incidents and pings the notification bell. Open the case to work it as a conversation with the driver, right through to resolution. The system raises incidents of its own too — gate discrepancies, stock variances, seal mismatches — and emergencies arrive here with a siren.

A

Open the case & reply

  • Click the bell alert (or the Incidents tab, grouped by driver) to open the case.
  • See the report, photos and location, then assign it, post updates to the driver, and mark it resolved.
  • The driver gets each update on their phone and can acknowledge the resolution — closing the loop.
Everything is permanent. The report and the whole conversation are written to the tamper-evident ledger — nothing can be quietly edited or deleted.
Incidents · case
🔧 BreakdownHigh
Reported by Yankho Phiri · Dedza escarpment, M1
👤 Assigned to Recovery Team
Yankho Phiri · driver
Tow truck is 30 min away. Cargo seals intact.
Operations
Noted — send the recovery receipt when you reach the depot.
✅ Marked resolved
Reply to the reporter…
An incident case open over the Incidents page: a breakdown report from a driver with its location, the team it is assigned to, the conversation between operations and the driver, and the reply box
An incident opened from the Incidents list: the driver's report and location, who it is assigned to, the conversation so far and the box to reply.
B

Emergency alerts — duress and site threats

  • A driver who is being robbed, hijacked or forced off route holds the red button in the app for two seconds. A critical duress incident is raised with their location and the active delivery; their phone stays silent.
  • A storekeeper or guard holds the same button at the depot and it becomes a site threat for that warehouse. Operations can raise one too — 🚨 Raise site threat at the top of Incidents, pick the site, add a note.
  • Every open console shows the alert at once. Switch on Alert sound & voice in Settings (per browser — ideal for the depot PC and the wallboard) and a siren sounds and the alert is read aloud, “Emergency. Chikondi Mwale reports a threat at Kanengo depot”, until someone acknowledges it. Managers are emailed; on-call numbers get an SMS when configured.
  • Away from the screen? Switch on Phone & lock-screen alerts in Settings on your phone. Emergencies then arrive as a notification even when the browser is closed — a long vibration, the phone's alert sound, and it stays on the lock screen until you open it; a tap opens the incident. Android works straight away; on iPhone add SC Tracker to the Home Screen first (Share → Add to Home Screen). Use Send me a test to check the sound on your handset. Warehouse managers who oversee all sites also get these on the field app.
Treat it as real. Call the police (997) first, then work the case. A false alarm is closed like any incident; the ledger keeps both.
Incidents · live alert
🏭 Site ThreatCritical
Three armed men forcing the main gate — guard radioed from the gatehouse.
Chikondi Mwale (gate) · Kanengo depot · 22:12
🔊 Siren on — Acknowledge
Open case
🆘 DuressCritical
Yankho Phiri · M1 near Dedza · SHP-2026-211 · 14 min ago
The Incidents page with the Raise site threat button beside the filters, headline counts, pattern detection for the last 30 days, and the list: a critical Site Threat for Kanengo depot, a critical Stock Variance from a blind count, and two Gate Discrepancy incidents from the guard's checks
Incidents after a busy evening at one depot: the site threat at the top, the stock variance a blind count raised, and the gate discrepancies the guard's checks produced — all opened by the system, not typed in.
15For operators · web console

Insurance claims

When a delivery is disputed or arrives short, SC Tracker raises a claim automatically with the evidence attached — ready for your adjuster to review, decide, and record the settlement. Every step is written to the ledger.

A

Claims file themselves

  • A dispute, or a quantity variance over your threshold, raises a claim automatically.
  • The evidence is pre-attached — the photos, the receipt number, GPS, and the tamper-evident receipt hash.
B

Work it to settlement

  • Open Insurance Claims, assign an adjuster, and investigate.
  • Approve or deny, then record the payout — every transition is written to the audit ledger.
Nothing is lost. The claim carries the original signed receipt, so the decision rests on evidence that can't be altered after the fact.
Insurance Claims
CLM-2231 · Maize flourInvestigating
Variance −8% · 110 of 120 bags received · SHP-4471
📷 Photo🧾 Receipt #📍 GPS🔗 Hash
Adjuster
Grace Banda ▾
Deny
Approve & settle
16For operators · web console

Fraud Sentinel

SC Tracker reads every operation as it happens — dispatches, fuel logs, invoices, PO approvals, stock adjustments, route deviations, gate passes, cold-chain overrides, logins — and scores anything that looks wrong. Each flag is explainable (it tells you why), carries an estimated Kwacha exposure, and is written to the tamper-evident ledger.

A

What it catches

  • Amount spikes & drops — a fuel log, invoice or PO far outside the normal range for that activity.
  • Duplicate invoices — the same invoice number and amount submitted twice.
  • Fuel siphoning — fuel logged well over what the trip should use, especially if it repeats.
  • Kickback pattern — the same officer approving the same supplier again and again.
  • Route deviations and after-hours activity — late-night dispatches or stock changes, repeated.
  • Cold-chain overrides, and any action by a banned actor.
B

What it does

  • Scores the event and sets a severity — low → critical — with a recommendation: monitor, flag, freeze or boot.
  • A critical score can auto-boot (ban) the actor; you can reinstate from the console.
  • Tune the sensitivity in Settings — every threshold change is itself ledgered.
  • Judge every flag — Confirmed, False alarm or Unsure, one tap under the flag (Admin or Logistics Manager). This is what Adaptive Defence learns from: a rule you keep confirming scores harder on its own, a rule that cries wolf becomes a proposal to quieten (section 17). Give each resolved incident an outcome the same way.
Fraud Sentinel
3
Flags today
1
Banned
2.4M
MWK exposure
🚨 Fuel overage · siphoning?Critical · 88
Driver One · logged 22 L over expected · repeat #2
Est. exposureMWK 96,000
Boot actor
Freeze & review
Fraud Sentinel with the live feed open: counts of anomalies, critical and high flags and the exposure flagged, then flag cards each with its severity, score, reasons, estimated exposure and a Boot actor button
Fraud Sentinel's live feed: each flag shows its severity and score, why it was raised, the estimated Kwacha exposure and the action recommended.
17For operators · web consolenew

Adaptive Defence

People will always find a new way round a control. Adaptive Defence is how SC Tracker learns from what you confirm and what you dismiss, learns each depot's, driver's and supplier's own normal, looks for the classic ways round a control, and proposes the tightening that would have caught it. Everything it does is explainable, on the ledger and reversible with one tap — and it never loosens a control on its own.

A

What it learns from

  • Your judgements: Confirmed / False alarm / Unsure on every Fraud Sentinel flag (section 16) and an outcome on every resolved incident (section 14).
  • The field's answers to check-ins (section 30), and your own records: adjustments, purchase orders, garage bills, counts, put-aways, fuel, trips.
  • Each entity's own normal — this depot's adjustment values, this truck's fuel per kilometre, this approver's speed — over 180 days. A jump above its own history is a finding, measured against itself, not a global number.
B

What it finds

  • Structuring — adjustments, POs or garage bills kept just under an approval line by one person. Pairing — one approver tied to one supplier. Vendor churn, weekend dispatches that arrive short, repeat count gaps at a site, unanswered check-ins, fuel over-fills, a reviewer who closes everything as unsure, a rule that keeps crying wolf.
  • Every finding names the control that should have caught it and comes with a proposal: lower that threshold from X to Y, put this depot on the watchlist with weekly blind counts, make this rule score harder.
C

Two lanes, your bounds

  • Inbox: an Admin accepts or rejects each proposal. Accepting applies it and puts it on the ledger; Revert undoes it with one tap. A rejection is remembered as accepted risk for 90 days, so the same pattern is not proposed again.
  • Auto lane (off until an Admin switches it on): SC Tracker applies a proposal itself the moment it is made — but only a tightening, and never below the floor you set for one step. A loosening is never automatic.
  • Watchlist: heightened scrutiny, time-boxed. Sentinel scores the person harder, a driver's check-ins allow half the time, a supplier's POs need approval whatever the value, a depot gets three blind counts a week.
D

It tests itself, explains itself, and reports

  • Explain on any finding writes it out in plain language: what happened, which control should have caught it and why it did not, why it matters, what to check by hand. With the AI connected it is written by the model and counts as an AI Investigator question; without, a rule-based summary.
  • Self-test (weekly, or “Run self-test now”): a dozen ways an insider might beat your controls — split purchasing, adjustments just under the line, a steady fuel skim, detours inside the corridor, counts a little short every time — are evaluated against your current settings, never against live data. Each is blocked, detected (with the score it would get) or undetected; the undetected ones become findings and, where a setting would have caught them, proposals. Those proposals always wait for an Admin, even with the auto lane on, because a simulation is not evidence.
  • Posture report: one signed PDF per month — flags judged and precision, what changed and who decided it, findings, the watchlist, rule calibration, self-tests. Its footer carries a public verify link, so an edited copy can be told from the original.
  • Network immunity: which tactics other SC Tracker organisations are seeing this quarter, as anonymised counts only — never names or figures, and only once two other organisations have seen it. A tactic others tightened a control for arrives here as high. Switch it off in Auto lane if you prefer not to share.
Adaptive Defence
78%
Alert precision
2
Proposals waiting
3
Under scrutiny
proposed · threshold12 min ago
Lower the stock adjustment approval threshold from MWK 500,000 to MWK 300,000
Xavier made 3 adjustments just under the line in 30 days (MWK 1,340,000 unreviewed). At MWK 300,000 each would have waited for a second Admin.
Accept & apply
Reject
applied · auto laneyesterday
Watch Kanengo depot with weekly blind counts
3 count variances in 60 days · Revert
18For operators · web console

AI Investigator

Ask about your operation in plain language — “which suppliers are overcharging?”, “show me risky drivers this week”, “what happened with SHP-4471?” — and get an answer grounded in your own data, with the records it used. It remembers the conversation, so you can keep digging.

A

Ask, then follow up

  • Type a question; the answer cites the shipments, POs or anomalies behind it.
  • Ask a follow-up — it keeps the thread, so “and last month?” just works.
  • It reads your data to answer; it never changes anything on its own.
Fair-use by plan. The AI Investigator is metered — 15 questions a month on Starter, 100 on Growth, and unlimited on Business and above (see section 25). It never reads anonymous tips.
AI Investigator
You
Which suppliers are overcharging us this quarter?
AI Investigator
Two stand out. Steel Traders Ltd — cement is +31% above its usual unit price on PO-1182. Lilongwe Fuels — diesel +18% on 3 POs.
Based on 14 purchase orders · tap to open each →
Ask about shipments, suppliers, drivers…
The AI Investigator page: quick-action buttons and, below them, the reply to a plain-English question ranking the top offenders by number of anomalies and worst score, with the model name shown beside the reply
The AI Investigator answering “Who are our top offenders right now, and why?” — a ranked list drawn from the operation’s own anomaly records, with the model named beside the reply.
19For operators · web console

Forensic Investigator

Reconstruct the full, ordered evidence chain for any shipment, receipt, actor or case — every event in sequence, each with its ledger hash — and export it as a case file for an auditor, insurer or court.

A

Trace it end to end

  • Search by shipment, receipt, person or case to pull its complete timeline.
  • Each step shows who did what, where and when — with the hash that seals it.
  • Because the chain is hash-linked, a single altered record breaks the chain and shows up immediately.
Forensic Investigator
SHP-4471 · evidence chain
Declared · 120 bags · Kanengo
a3f1…9c2
Received · 110 bags · GPS 📍 · photo
7b0e…14d
Witnessed & signed · G. Banda
c82a…6f1
Variance −8% → claim CLM-2231
de55…08b
⬇ Export case file (PDF)
20Open to anyone · no login

Verify a receipt

Every signed receipt can be checked by anyone — a customer, an auditor, an insurer — with no account. The verify page recomputes the hash chain, checks the digital signature against the signer's public key, and confirms the independent timestamp. If a receipt is genuine and unaltered, it says so; if a single character was changed, it fails.

A

Scan the QR, or open the link

  • Each receipt carries a QR code — scanning it opens the public verify page.
  • The page shows a green tick — Authentic receipt — and then the goods, place, time, sender, receiver and witnesses on record. An altered or forged code fails the check.
  • Share the link with a customer or insurer so they can confirm it themselves.
  • The page also shows the ledger anchor behind the receipt: a timestamp from an independent RFC-3161 authority and, once the hourly publication has caught up, the Bitcoin block it was sealed in — proof the receipt existed by that time that does not depend on our servers.
  • Issued documents verify the same way: a donor assurance report at /verify/report/… and an EUDR due diligence statement at /verify/dds/…, both printed on the PDF (section 22).
Why this matters. It turns a receipt into proof: no one — not even you — can change what was signed without the check failing.
app.sctracker.africa/verify
Receipt RC-4471-02✓ Verified
Hash chainIntact
SignatureValid · Y. Phiri
Timestamp anchorConfirmed
Maize flour (50kg) · 110 bags received · Kanengo · 14 Oct 2026
The public receipt verification page: a green tick with Authentic receipt, then the receipt number, goods, location, time confirmed, sender, receiver and witnesses
The public verify page for one receipt, no login needed. A green tick means the receipt is authentic; below it are the goods, place, time and who signed.
21For operators · web consolenew

Anonymous tip-off channel

Staff, drivers, agents and the public can report theft, fraud, bribery, safety problems and misconduct without giving a name — and still get an answer. Every organisation has its own channel, switched off until an Admin turns it on and names the people allowed to read tips.

A

Settings → Anonymous tip-off channel (Admin)

  • Switch the channel On, set a short SMS / USSD code for your organisation and an escalation email (an auditor or funder).
  • Name up to five tip handlers — the only people who can read a tip. Choose people a tipster would trust and who are unlikely to be the subject of a report; an external Auditor login can be one.
  • Print the poster: the QR and link, the SMS code and the USSD option on one page for the depot wall. If a link leaks, Rotate link and reprint; tips already received are untouched.
Admins manage, handlers read. An Admin who is not a handler sees counts only. Naming or removing a handler, and every opening of a tip, is written to the ledger. Fraud often involves management — that is why the list is chosen on purpose.
Poster · A4
Seen theft, fraud or wrongdoing?
Report it anonymously. Nobody will know it was you.
Scan or open app.sctracker.africa/tip/…
No internet? SMS TIP KANENGO what you saw
or dial the USSD menu → 4. Report wrongdoing
You get a receipt code. Keep it: it lets you read what was done and answer questions — still without a name.
Settings, Anonymous tip-off channel: the On switch, counts of tips received, unread, investigating and closed, the QR code and public link with Print poster, Copy link and Rotate link buttons, the SMS/USSD code KANENGO, the escalation email, the message shown on the public page, and two named tip handlers — the Admin and an external Auditor
The channel switched on: the poster QR and link, the SMS code, the escalation email, and two named handlers — the Admin and an external auditor.
B

What the tipster sees

  • The poster link opens a plain page — no login, no cookie, no location. They pick a category, write what happened, add up to three photos (camera details, time and GPS are stripped before storage), and optionally where, when and a way to be reached.
  • They get a receipt code such as SP6T-EPNM. It is the only way back to the report: with it they read the status and the outcome, see questions from the handlers and answer them — still anonymous. It cannot be recovered if lost, because nothing links it to a person.
  • By phone: text TIP KANENGO what you saw, or dial the USSD menu and choose 4. Report wrongdoing. TIP STATUS KANENGO SP6T-EPNM reads the status back.
C

What a handler does — the Tip-offs page

  • Open a tip (decrypted on the server; the opening is ledgered), send a question the tipster reads with their code, mark investigating.
  • Open an incident — written in the handler's own words; the tip's text, photos and contact never leave the sealed record. The incident is then worked like any other.
  • Escalate sends a notice (no contents) to the escalation email. Close with outcome tells the tipster what was found or done. A later message from the tipster reopens it.
Sealed by design. Tips are encrypted with a key only the running server holds; the data-protection export carries counts and dates only; the AI Investigator never reads them; there is no org-wide bell, because the timing of a bell can point at who was in the room. Handlers are told by email, without content.
9:41▮▮▮ 4G
Speak up — anonymously
Send a report
Check on a report
What is this about?
Theft or missing stock ▾
What happened?
Two pallets of maize flour left on a white Canter that was not on the schedule…
📷 Add photo
Send anonymously
no login · no cookie · photo metadata removed
The public tip-off page after a report is sent: a green tick, the words Thank you, your report has been received, and the receipt code SP6T-EPNM with a Copy button, plus the note to come back and choose Check on a report
What a tipster sees after sending: the receipt code, the one thing they need to keep. The page sets no cookie and records no identity.
The Tip-offs page for handlers: counts of tips received, unread, reviewing, investigating and closed; a list of four tips on the left; on the right a theft tip opened with its text, the location, two photos marked metadata removed before storage, the handler's question to the tipster and the tipster's anonymous reply naming part of a registration number
The handlers' desk with a theft tip open: the report, its two photos (metadata removed), the handler's question and the tipster's answer — a partial registration number — all still anonymous.
22For operators · web consolenew

Donor assurance report & EUDR due diligence

Two documents your funders and buyers ask for, assembled from custody data you already hold. Both are issued documents: the PDF carries an id and a digest, and anyone can check at a public link that SC Tracker really issued it — an edited PDF fails.

A

Chain of Custody → Donor assurance report

  • Tag deliveries with a Funder / programme when you initiate them (section 4).
  • Prepare a report: pick the programme and the period, Preview figures, then Issue PDF.
  • The report states deliveries, verified deliveries, disputes, variances of 2 % or more, seal mismatches, phone confirmations, value declared and verified, claims and transporter payouts — and the integrity of the record itself: the ledger recomputed, every receipt recomputed, the anchors published in the period. Each delivery carries a receipt QR.
  • Tips are counted (received, open, closed) and nothing else about them appears.
B

EUDR origin plots & due diligence statement

  • From 30 December 2026 an operator placing coffee, soya, wood, rubber, cocoa, palm oil or cattle products on the EU market needs the geolocation of every plot the commodity was produced on, with a due diligence statement.
  • On the shipment's card open 🌍 EUDR origin plots → Add plot: commodity, producer, district, area, harvest window, and a point (up to 4 ha) or a polygon (required above 4 ha). Points over 4 ha are refused; a polygon's measured area is checked against the stated one.
  • Issue due diligence statement (PDF) bundles the plots, the whole custody chain of the shipment with receipt fingerprints and the risk checks — plots geolocated, polygons where required, one commodity, chain complete and verified, receipts recompute, no dispute or seal mismatch, producers identified. It concludes negligible risk only when every check passes.
  • Plots GeoJSON is the file the EU Information System accepts.
What stays yours. Filing the statement in the EU system and the legal judgement of “legally produced” remain the exporter's job. SC Tracker gives you the geolocation, the chain and the evidence behind them.
Donor assurance report · PDF
Donor assurance report
Chilimika Development Fund · 10 Aug – 8 Nov 2026 · issued RPT-… · digest 7400…3f3a
Deliveries
42
Verified
40
Variance ≥ 2 %
1
✓ Ledger intact · receipts recompute 40/40 · 3 anchors (2 RFC-3161, 1 Bitcoin)
Check this document: app.sctracker.africa/verify/report/RPT-…
Chain of Custody: the Donor assurance report card opened, with the programme and period pickers, Preview figures and Issue PDF buttons, headline tiles for deliveries, verified, disputed, variance, phone-confirmed and value verified, a green line reading Ledger intact, and the narrative paragraph the report will carry
Preparing a donor report: choose the programme and period, preview the figures and the integrity line (“Ledger intact”), then issue the PDF.
Two handover cards: a coffee shipment with its seal line, feature-phone receiver and the EUDR section open listing two plots — a 3,640 ha polygon estate in Rumphi and a 2.4 ha point plot of a growers' cooperative in Chitipa — with Add plot, Issue due diligence statement (PDF) and Plots GeoJSON buttons; below it a maize delivery whose seal reads back at receipt as intact with zero variance
A coffee shipment's EUDR section with two origin plots recorded, ready to issue the statement; below it, a maize delivery whose seal was read back intact at receipt.
23For operators · web consolenew

Pay-on-proof — the receipt releases the payment

A sealed, witnessed receipt releases the transporter's payment to their Airtel Money or TNM Mpamba wallet through PayChangu. Honest, on-time confirmation becomes the thing that gets people paid — and nothing is paid without a receipt.

A

Set the rules (Admin)

  • Pay-on-proof in the menu: switch it on, set the flat amount per delivery, the auto-approve threshold, the daily cap (MWK 500,000 by default) and who is paid — the receiver (the driver who took custody) or the sender.
  • On Staff & Drivers, record each driver's wallet: phone number and operator.
  • A delivery can carry its own amount on the initiate form; it overrides the flat amount.
B

How a payout runs

  • Receipt sealed → one payout for that handover, never two.
  • At or below the threshold it is approved and sent at once; above it, it waits for a second Admin — not the one who set the rules (four eyes). Over the daily cap, or with no wallet on file, it is blocked until you fix and retry.
  • PayChangu's reference and status are stored and re-read until completed or failed; every change is on the ledger.
Start cautious. Begin with auto-approve at 0 and a low daily cap so a second Admin sees every payout; raise both after a week of clean runs. Money leaves your organisation's own PayChangu balance; we switch the feature on for you once that arrangement is in place.
Pay-on-proof
6
Paid today
1
Awaiting approval
270k
of 500k cap
PAY-… · Yankho Phiri · Airtel MoneyAwaiting approval
SHP-2026-211 · receipt sealed 22:40 · MWK 45,000 · above threshold
Approve & send
Reject
PAY-… · B. Nyirenda · TNM MpambaCompleted
SHP-2026-207 · MWK 30,000 · PayChangu reference stored
24For operators · web consolenew

Data protection — the Malawi Data Protection Act, 2024

Drivers' locations, phone numbers and photos of receipts are personal data. Settings → Data protection (Admin) holds the tools the Act expects you to have, and everything done there is written to the ledger.

A

Exports, access and erasure

  • Export everything — all your organisation's data as JSON, photos optional, for portability or an audit (one export per ten minutes).
  • DPA pack — a PDF of your records of processing, sub-processors, security measures, retention, rights procedure, breach procedure and open items, generated from how your organisation is actually configured.
  • Subject access — everything held about one party (driver, receiver, witness) as JSON, to answer an access request.
  • Erase a party — removes their name and contact details, deletes location history, devices and codes. Custody records, receipts, signatures and ledger entries are kept for seven years under the legal-obligation basis — the ledger is tamper-evident and cannot be edited. A party on an open delivery cannot be erased until it closes.
B

Breach register — the 72-hour clock

  • The moment a breach is discovered — a lost handset, a compromised account — Log a breach. Every Admin is alerted and the register shows the MACRA deadline, 72 hours from discovery.
  • Contain first: remove the party on Staff (that revokes the phone's access at once) or deactivate the account. Then press MACRA notified now and, if the risk to people is high, People notified now; add notes; Close.
  • The register and the ledger entries are your evidence of due process; the DPA pack lists any overdue notification as an open item.
Prevention checklist from the pack: two-factor on every Admin account, off-site ledger backup, error monitoring, an out-of-hours alert number, and Require unlock switched on in the field app.
Settings · Data protection
Export everything
Export (no photos)
DPA pack
Generate PDF
BRC-… · low · 1 affectedMACRA deadline · 67 h left
Driver handset lost at Dedza fuel stop. App lock was on; device token revoked within 20 minutes.
MACRA notified nowPeople notified nowAdd note
Settings, Data protection panel: Export everything with and without photos, DPA pack Generate PDF, Subject access for one party, the Erase a party box, and the breach register with one low-severity entry about a lost driver handset showing the MACRA deadline and the buttons MACRA notified now, People notified now, Add note and Close
The Data protection panel: exports, the DPA pack, subject access, erasure, and a breach register entry with its 72-hour MACRA deadline counting down.
25For operators · web console

Plans, trial & billing

A new organisation starts with a short free trial — enough to run a full delivery end to end. After that a plan keeps the service running. Pay monthly, or annually and get two months free. Pilot organisations are set up by us directly, so there's nothing to pay during the pilot.

A

Four tiers

  • Starter — MWK 120,000/mo · 2 office users · up to 159 deliveries · 15 AI questions.
  • Growth — MWK 350,000/mo · 5 office users · up to 550 deliveries · 100 AI questions.
  • Business — MWK 900,000/mo · 25 office users · up to 2,000 deliveries · unlimited AI.
  • Enterprise — unlimited, talk to us for pricing.
  • Every plan has the core: signed handovers and receipts, the ledger, Fraud Sentinel, incidents and the emergency button, inventory, orders and the field app. Starter has 1 site.
  • Growth adds Site Operations, Procurement, Distribution, Fleet, GPS tracking and check-ins, the customer tracking link, Cold Chain, Insurance Claims, the Forensic Investigator, analytics and scorecards, and Word copies of certificates. Up to 3 sites.
  • Business adds Adaptive Defence, the Wallboard, Pay-on-proof, donor assurance and EUDR, the tip-off channel and the baseline monitor. Unlimited sites.
  • A module your plan does not include shows a lock in the menu, and its page says which plan has it. Nothing is deleted when a module is locked. A free trial has every module open.
  • Office users are console logins; drivers, storekeepers and guards on the phone app are not counted. When the seats are full, deactivate a user or move up a plan to add another.
B

See your usage

  • Settings → Billing shows your current plan and how much of the month you've used.
  • Upgrade or switch to annual there. Today we invoice you directly, in Malawi kwacha. Online payment by card and mobile money through PayChangu is being switched on.
Settings · Billing
Current planGrowth · monthly
Deliveries this month312 / 550
AI questions44 / 100
Switch to annual
Upgrade plan
26For drivers · Android app

Install the app & pair your phone

A one-time setup. After this, most updates arrive automatically over the air — only the occasional larger update needs a fresh install.

Scan to install

Point your phone camera at the QR code from your manager. It downloads the app — use Wi-Fi, it's a large file. Tap the downloaded file, allow “install from this source”, then Install.

SC Tracker Field
scan → download → install
A

Enter your pairing code

  • Open the app and type the code your manager gave you (or scan its QR).
  • Your phone is now linked — you'll see your assigned work under My Work.
  • Allow location and camera when asked — both are needed to confirm deliveries.
9:41▮▮▮ 4G
Pair this device
Enter the code from your operator
7K4-QP9
Pair
27For drivers · Android app

Confirm a delivery

When goods reach you, confirm receipt. This is the signed proof that you received them — in the right amount, at the right place.

A

My Work → tap the handover

  • Leaving a depot with a guard? Tap Show gate pass under the handover and hold the QR up at the gate. The guard checks the load against it, and it works once.
  • Check the product and enter the quantity you actually received.
  • Tap to capture GPS and take a photo of the goods.
  • If it is a cold consignment, read the thermometer and type the temperature you see. The app shows the safe range; a reading outside it is reported to operations.
  • If the consignment was sealed, type the seal number you see on the truck — read it off the seal, don't copy it from paperwork. A different number disputes the delivery automatically.
  • Sign and confirm. A witness co-signs, and the receipt is sealed.
Stand at the delivery point when you confirm — your GPS is checked against where the delivery was expected.
Battery-friendly. Location switches on only while you have an active delivery and switches off when you're idle — so the app won't drain your battery or data all day.
9:41▮▮▮ 4G
‹Receive delivery
Maize flour (50kg)Declared: 120 bags · SHP-4471
Quantity received
120
Seal number on the consignment
SL-20481
📍 Capture GPS
📷 Photo
Sign & confirm receipt
28For drivers · Android app

Report a problem, log a stop — or call for help

Three actions on My Work keep operations informed, keep you in the clear, and get help to you fast.

A

🚨 Report incident

For a breakdown, theft, accident, or serious delay. Pick the type and severity, add a note, and attach a photo. It reaches operations instantly with your location.

B

⏸ Log a stop

Stopping for a while — lunch, rest, an overnight, a roadblock, refuelling? Tap Log a stop and pick the reason. This tells operations why you stopped, so your rest is not flagged as a suspicious delay.

C

🆘 HOLD for emergency

Being robbed, hijacked or forced off your route? Press and hold the red button for two seconds. Operations get a critical alert with your location at once — a siren on their screens, an email to managers, an SMS to the on-call number. Your phone stays silent, and it works without signal: the alert goes the moment you reconnect.

Lock the app. Switch on Require unlock (biometric / PIN) in the app so a lost or taken phone cannot be used to confirm anything in your name.
9:41▮▮▮ 4G
‹Log a stop
Tell operations why you've stopped — a logged reason won't be flagged.
Reason
🍽 Meal😴 Rest🌙 Overnight 🚧 Roadblock🚦 Traffic⛽ Refuel
Log this stop
29For drivers · Android app

Follow up on what you reported

Everything you report has a home in My Incidents, where you can watch operations handle it — and confirm when it's sorted.

A

My Incidents → open a case

  • See the conversation with operations — assignments, replies, status changes.
  • Add your own updates at any time.
  • When operations mark it resolved, tap Acknowledge resolution to close it.
Tap a notification to jump straight to the case — you'll get one when operations reply or assign your report.
9:41▮▮▮ 4G
‹Incident
🔧 BreakdownResolved
👤 Assigned to Recovery Team
You
Tow truck 30 min away.
Operations
Vehicle recovered — thanks.
Acknowledge resolution
30For drivers, storekeepers & guards · Android appnew

When the app asks you something

Sometimes the app notices something about your work before anyone else does — a long stop, a route it did not expect, a count that does not match, a put-away that differs. Instead of only telling the office, it asks you, there and then. A quick honest answer takes one tap and keeps you in the clear.

A

What it asks about

  • Drivers: “You have been stopped for about 40 minutes — is everything okay?” or “You are about 12 km off the expected route — is everything okay?”. Answer within 10 minutes.
  • Storekeepers and guards: “Your count of Maize 50kg does not match our records — can you tell us anything that might explain it?” or “What you put away for SHP-2026-211 differs from what was sent — what happened?”. Answer within 30 minutes. The question never shows you the book figure.
  • Nothing is assumed. A traffic jam, a police checkpoint, a fuel stop, a rest, a diversion, damaged stock set aside — these are normal, and saying so is all that is needed.
B

How to answer

  • The card appears over whatever screen is open, or from a notification. Tap the answer that fits, add a note if you like, Send answer. If you are driving, pull over first — the card waits.
  • Answer later hides the card for a few minutes. If you do not answer in time, operations are told and may call you; you can still answer afterwards, and it is recorded as late.
  • Using Log a stop instead also answers the question — nobody is escalated for taking the old route.
  • Your answer goes on the record, is sent even if you are offline at the time, and the office sees it next to the trip or the count.
C

“I am not safe”

Every card has this line at the bottom. If you are being robbed, hijacked or forced and cannot speak freely, tap it and confirm. To anyone watching your phone it looks like you answered the question; operations get a critical alert with your position at once, exactly like holding the red button.

15:12▮▮▮ 4G
My Work
SC TRACKER · CHECK-IN7 min to answer
Stopped for 38 minutes
We noticed you have been stopped for about 38 minutes on SHP-2026-231. Is everything okay? Tell us what is happening — one tap is enough.
🚦 Traffic🛂 Police checkpoint⛽ Fuel stop 🍽 Rest or meal🔧 Breakdown🕐 Customer asked me to wait
Send answer
Answer laterI am not safe
31For storekeepers & guards · Android appnew

Your site & your shift

Install and pair the app exactly like a driver (section 26). Because your manager invited you with the role Warehouse and your site, the app opens on your site's home screen instead of My Work. The site you are paired to is named at the top; everything you do is tied to it and recorded under your name.

A

The site home

  • Six tools: Gate check, Gate log, Counts, Receive into stock, Write-off and Shift — plus Cold rounds where your site has fridges or a cold room, Report incident and the red emergency button.
  • Everything works offline: actions queue and send in order when signal returns.
  • Warehouse managers: if an Admin gave you all sites, the home screen shows your home site and a Switch site button. Pick the depot you are standing in — the tools, lists and everything you record then belong to that site, and the screen says so. Sync any waiting items before you switch.
B

Open and close your shift

  • Open with the checklist — doors and gate were locked, seals on stock areas intact, alarm set and disarmed normally, no forced entry, stock area as it was left, CCTV and lights working — and a photo or two. A “not OK” tells operations immediately. Your office decides what the list asks, for the whole organisation or for your site; the app shows their wording.
  • Close with the same checklist and photos, and hand the keys to a named colleague, who accepts them on their phone. The office sees who held the site at every hour.
  • A shift still open after 14 hours is flagged as overdue.
C

🆘 HOLD for emergency at this site

A robbery or break-in in progress: hold the red button for two seconds. It raises a site threat for your warehouse — siren and spoken alert on every console, email to managers, SMS to the on-call number — with or without a GPS fix. Your phone stays silent.

6:02▮▮▮ 4G
Kanengo depot
Tamanda Kachale · storekeeperShift open 06:00
🚧 Gate check📒 Gate log🔢 Counts 1 📦 Receive🗑 Write-off🔑 Shift
Open-shift checklist
✓All doors and the gate were locked on arrival
✓Seals on stock areas intact
✕CCTV / lights working
🆘 HOLD for emergency at this site
32For storekeepers & guards · Android appnew

Gate check & gate log

Nothing leaves without a pass, and the pass is checked against the truck — not the paperwork.

A

Gate check — scan the pass

  • Tap Gate check and scan the QR on the gate pass (or type its code). The pass shows the vehicle, the seal and every line.
  • Read back what you see: the registration on the truck, the number on the seal itself (don't copy it from the pass), and the quantity you count for each line. Add a photo and a note.
  • Choose Allow or Refuse. The app tells you on the spot if anything differs; operations get an incident either way, and the pass cannot be used again.
B

Gate log — everyone in and out

  • Log every vehicle and visitor: in or out, registration or name, company, purpose.
  • Flag no pass when a load tries to leave without one, or refused exit — both reach operations as incidents.
No signal at the gate? Switch to manual mode, enter the pass code and your counts; the check is compared with the pass the moment the phone reconnects, and you are told the result on screen.
14:21▮▮▮ 4G
‹Gate check
GP · out · SHP-2026-211MW-BT 4471 · seal on pass: SL-20481
Registration you see
MW-BT 4471
Seal number you read (off the seal, not the pass)
SL-20481
Maize flour (50kg) · pass 120
118
Cooking oil (20L) · pass 30
30
Refuse exit
Allow
33For storekeepers & guards · Android appnew

Counts, put-aways & write-offs

Stock moves in three ways from your phone — and only these three. Everything else is a variance the system will notice.

A

Blind counts

  • Counts lists what you have been asked to count — the product, never the book figure. Count it, enter the number, add a photo if you like, submit.
  • You are told only that the count was recorded. If it differs from the books, the office investigates the stock, not you — the incident is attributed to the count.
  • If it does not match, your phone may ask you a moment later whether anything explains it — damaged stock set aside, stock issued or received but not yet recorded, or you would like to recount. It never shows you the figure. Answer within 30 minutes; silence is escalated to the office (section 30).
B

Receive into stock (put-away)

  • Pick the confirmed delivery that has just arrived at your site (the app lists the last three days), check the lines, add batch and expiry where they apply, and put it away. Stock moves.
  • A supplier delivery on a purchase order and a transfer from another warehouse are listed too, with their gate-pass status — pick the one that has arrived and enter what actually came. The office cannot receive these from a desk at your site: your put-away is what writes the receipt and completes the order or transfer. A difference from what was ordered or sent is flagged to operations — and your phone asks you what happened while the goods are still in front of you: arrived short, damaged and set aside, still offloading, or a counting slip you will correct.
  • Goods that arrive another way — a return, a local purchase — go in under Other with a reference.
C

Write-off request

  • Damage, expiry, spoilage, theft or other: pick the product and quantity, write a note and take at least one photo.
  • Nothing moves until an Admin or Logistics Manager approves it; you get the decision as a notification. You can never approve your own request.
D

Cold rounds

  • If your site has fridges, freezers or a cold room, Cold rounds lists them with each one's safe range and what is due. Go to the unit, read the display itself, type the temperature and photograph the display. Do not copy the last figure.
  • Do it at the unit, at the time. A reading logged later is marked late, and a round nobody did while you had the site open is reported.
  • If the reading is outside the range, operations are told at once and the app asks what you did: closed the door, power is back, moved the stock, called a technician. Fix what you can, then log a new reading as soon as it is back in range. That is what ends the excursion.
10:15▮▮▮ 4G
‹Counts
Maize flour (50kg)Count every bag in bays 3 and 4 · due today
Quantity you counted
2184
Note (optional)
Counted twice, bay 3 and bay 4.
📷 Photo
Submit count
✓ recorded · thank you
◆

More in the console

Beyond the day-to-day, the console carries a set of oversight and planning screens. They read the same custody data you've already captured — nothing extra to enter.

⚡ Command Center

Your home screen

Live KPIs, today's deliveries, open incidents and the latest alerts in one view — where you land after sign-in.

🛒 Orders & Distribution

Fulfilment flow

Customer orders, and inter-warehouse transfers that move stock for real — lines leave the source at dispatch under a gate pass and land when the destination receives them (section 6).

📊 Supply Chain Analytics

Trends & costs

Volumes, variances, fuel spend and on-time rates over time — to see where money and time go.

📊 Driver Scorecards

Per-driver record

Deliveries, on-time rate, variances, stops and flags for each driver — a fair, evidence-based picture.

⚠️ AI Risk Prediction

What to watch

Highlights the shipments, routes and actors most likely to run into trouble, so you can act early.

🗺️ Route Optimization

Plan the run

Suggests efficient routes between your registered sites — the baseline the trip audit compares against.

🌀 Baseline monitor

Spot the drift

Learns your normal from your own activity — handovers, variances, disputes — and flags when today moves away from it.

🏭 Site Operations

Inside the depot

Gate passes and checks, the gate log, blind counts, put-aways, write-off approvals and shift custody — per warehouse.

💸 Pay-on-proof

Receipts that pay

Payouts to mobile-money wallets released by sealed receipts, with approvals, caps and a full history.

🤫 Tip-offs

Handlers only

The desk for anonymous reports — visible only to the named handlers, never to the rest of the console.

🧬 Adaptive Defence

It learns

Judge flags, see what the detectors found, accept or reject each tightening, watch who is under scrutiny — and switch on the auto lane within your bounds (section 17).

⚙️ Settings

Tune & control

Fraud thresholds, variance limits, alert sound & voice, the tip-off channel, data protection, your plan and billing, and your profile — Admin-controlled, every change ledgered.

◆

Offline & good practice

Offline

It works without signal

The driver app saves confirmations, incidents and stops on the phone and syncs automatically when signal returns. A banner shows anything still waiting.

GPS

Location, only when needed

Tracking runs automatically only during an active delivery and stops when the driver is idle — it protects the route audit without draining battery or data all day.

Updates

Updates come to you

Most updates arrive over the air — reopen the app to get them. Only the occasional larger update needs reinstalling.

Sites

GPS on every site

Register each depot and project site with its GPS. It's what makes geofencing, route audits and delay-flagging work automatically.

Wallboard

Put it on a screen

Run the Ops Wallboard fullscreen on a depot TV so the whole team sees live deliveries and alerts.

Proof

Nothing is editable

Every receipt, incident and update is sealed into a tamper-evident ledger. That permanence is the point — it's your evidence.

Seals

Read the seal, not the paper

Whoever reads a seal back — receiver or gate guard — reads it off the seal itself. A number copied from a document proves nothing.

Phones

Lock the app

Switch on Require unlock in the field app. If a phone is lost, remove the party on Staff — its access ends at once — and log it in the breach register.

Alarm

Hear it, don't just see it

Switch on Alert sound & voice on the depot PC and the wallboard so a duress or site-threat alert is heard the moment it arrives.